When recharging a car battery, a jump start is not the only way to recharge your battery. The following are a step by step procedure on how to charge a battery.

Trickle charger
This device delivers electricity to your battery at a slower rate. This is much better because it is useful when charging a battery than charging it fast.

Clean the battery terminals
One should clean the terminals by rubbing them with sandpaper, and one should make sure not to touch the airports because it can burn your skin.

Attach the charger cables
The car should be turned off when you are attaching the charger cables. Then connect the positive terminal cable to the positive terminal of the battery and vice versa.

Turn on the charger
Once you have connected, turn on the charger, you may leave the charger charging overnight.

After recharging, check if the battery works by turning on the engine; if it does not work, replace the battery.